Explore the world of Far Table: far-table.com →
All chapters
Parchment
Chapter 16

Homebrew

Homebrew is the part of the reference that you write. A homebrew page is a card like the shipped ones. It sits in the same lists and search finds it. Your pages are kept in sources, which work like books.

You can write twelve kinds of page, in either edition:

  • spell, monster, magic item, equipment, condition;
  • class, subclass, class option (such as an Eldritch Invocation);
  • species (a race, in the 2014 rules), subrace (2014) or lineage (2024);
  • background, feat.

The Homebrew tab shows only the pages in your library, laid out like Browse. Two tiles work differently there:

  • Classes opens an outline. Under each class are your subclasses and its option lists: Eldritch Invocations, Metamagic and Fighting Styles.
  • Species (Races in the 2014 rules) opens the same outline for your subraces or lineages.

Tap a subclass, a feature or an option in the outline to open it.

Starting a page

  • Most kinds. Open a list of that kind, on Browse or on Homebrew. A + appears in the top bar. Tap it for a blank page.
  • A subclass. Open its class's card and tap + New subclass, above the subclasses.
  • A subrace or lineage. Open its race's or species' card and tap + New subrace (2014) or + New lineage (2024).
  • An Eldritch Invocation. Open the Warlock card and tap + New invocation, at the end of its invocations.
  • Any class option. On Homebrew, open Classes and tap + New option under the list it joins.

The outlines on Homebrew have the subclass and the subrace or lineage lines too, under each class or species they list. Each of these starts the page already joined to its class, list, race or species.

You can also start from a shipped entry. Open its card and tap Copy to your homebrew at the foot. You get a page of your own with every field filled in, named with "(copy)" on the end. The original does not change.

The editor

The editor has two sides:

  • Quill is the form you fill in.
  • Page is the finished card, as a reader will see it.

When the window is wide enough, the two sit side by side and the Page changes as you type. A Mac or Windows window at full size is wide enough, and so is a tablet held wide. In a narrow window or on a phone, a switch above the form goes from one to the other.

Three rules:

  • Only the name is required. Nothing is saved until the page has a name. Every other field can stay empty, and an empty field is left off the card. One exception: a monster's six ability scores always show, as dashes when they are empty.
  • There is no Save button. The app saves each change as you make it, so you can go back at any time.
  • If a save fails, a strip at the top says This page could not be saved. Tap Retry before you leave.

Whose page it is

A page you write is yours. Only you can change it. To put your name on your pages, type it under Your name in Homebrew settings. A later change of name does not change pages that already have one.

A page someone shared with you stays theirs. You can read it and use it, but it never opens in the editor. To change it, tap Make my own copy on its card. The copy is yours, and the editor opens on it.

Sources

A source is a named set of pages, like a book. SRD 2014 and SRD 2024 are the two that ship with the app. Every other source is in your library: yours, or one someone sent you.

  • A page is in exactly one source.
  • A new page, or a new copy, goes into My pages, your own source.

To move a page, tap Move to a source on its card, or the In: line at the top of the editor. Tick a source and tap Save. New source, in the same list, makes one.

Homebrew settings is in the three-dot menu of the top bar. It lists your sources. Tap one to open its page. There you can:

  • Change its name and its licence. The licence tells other people what they may do with your pages. The app shows it and does not enforce it.
  • See its pages. Move out sends a page back to its author's own source.
  • Tap Add pages to tick pages into the source. If you take a tick off, Save moves that page out.
  • Tap Remove this source.

Remove this source takes the source and every page in it out of your library, your own pages included. The app says how many pages will go and asks first. Two things are worth knowing:

  • A character that uses one of those pages keeps its own copy, so the sheet still works.
  • The only way back is a file that holds the source: one someone shared, or a backup. If the pages are yours, back up first.

Removing is not the same as turning a source off for one character. Off hides the source from that character and changes nothing in your library. See the chapter Your Character.

Sharing a source, backups and adding a file are in the chapter Backup, Restore and Sharing.

A paired computer and phone keep one library. That chapter covers it too.

Artwork

Once a page has a name, an artwork bar sits above the form. Tap Add photo:

  • On a phone or tablet, take a photo or choose one from your photo library.
  • On a Mac or Windows machine, you pick a file.
  • On a Mac or Windows machine paired with a phone, Camera takes the photo on the phone.

Wide pictures fit best, at 3:2. Replace changes the picture and the X beside it removes it. A copy of a shipped entry shows the original's artwork on its card until you add your own.

Removing a page

  • Your own page. Tap Tear out, on its card or in the editor's top bar.
  • Someone else's page. Tap Remove from my library on its card. This removes only your copy. If they share it again, it comes back.

The app asks first, and there is no undo. A page that a character uses cannot go: the app names the character. Take the page off that sheet first.

Homebrew at the table

Your library is your own. A campaign's table reads only its sources and the pages its DM lets in. Players find those pages in Rules and can pick them on a sheet.

As the DM, you put your own pages at the table in three ways:

  • A whole source. Tick it under Sources on This table's sources. The chapter Campaigns and the Atlas has that screen.
  • One page. Tap + Add from my library on the same screen.
  • While you host. The card of a page of your own has an At this table switch. Show to players on its picture turns the switch on too.

As a player, you can use your own homebrew on your sheet at once, before the DM answers.

  • A page the table does not have goes to the DM with your sheet, the moment you pick it.
  • To offer a whole source, open its page in Homebrew settings while you are connected and tap Offer to and the campaign's name. Only the pages you wrote go.

As the DM, you answer in one of two places:

  • On the player's sheet. The row that uses the page reads Not yet approved, with Accept. Tap the row's name to read the page first.
  • Under Submissions, on This table's sources. Each group has Accept and Decline. The menu row counts what waits, such as This table's sources · 2 waiting.

What your answer does:

  • Accept puts that version of the page at the table. It does not join your own library.
  • Decline keeps it off. The player's sheet still works.
  • A submission waits until you answer, after the session too.
  • If the player changes a page you accepted, the table keeps your version until you tap Accept again.

As a player, the page's row on your sheet says where it stands: Waiting on the DM, At this table since and a date, or Not at this table. See the chapter Your Character.

To take a page off the table, as the DM, tap Remove from table beside it on This table's sources. A page of a source that is on has it on its card too, in the three dots at the end of the buttons. Nothing leaves a library, and the rest of its source stays at the table. For a page of your own, the At this table switch puts it back.

Rules text

Rules text is the prose of a rulebook, in chapters. It is not a card and you cannot write it in the app. It arrives in a file (see the chapter Backup, Restore and Sharing). While your library holds any, Homebrew shows a Rules text tile. The tile opens an outline, and each section opens in the reader. You cannot edit it.

One library for each edition

The 2014 rules and the 2024 rules each have their own homebrew. A new page joins the edition you are reading and shows only under that edition. When the other edition holds pages of yours, Homebrew says so in a line under its tiles. Tap the edition label to change edition. The chapter Two Editions tells you more.

What the forms ask for

Each kind has its own form, and the screen makes most of it plain. Three things are true of every form:

  • The fields follow the page's edition, so a 2014 form and a 2024 form differ a little.
  • You type a line the way the book prints it.
  • A dropdown is a list of suggestions. Where it ends with Something else…, you can type a value of your own. The list offers it next time, marked "(yours)".

What the screen does not tell you:

  • Spell. How it rolls is closed at first, and you can leave it empty. Fill it in and a character's sheet shows the spell's attack or saving throw and its dice.
  • Monster. Type each line whole, as a stat block prints it, such as "14 (natural armor)" for Armor Class. Type only dice in Hit Points, such as "7d10", and the app writes the line with the average, using the Constitution score: "59 (7d10 + 21)". A Challenge brings its experience points with it. This is text on the card. In a fight the app shows a monster's status in words, never a number.
  • Class. You do not type the level table. Level Progression asks if the class casts spells and then builds the table, spell slots included. + Resource adds a column of your own, such as Rages. Give only the levels where the number changes. A feature with a level goes into the table by itself.
  • Subclass. Each feature is a page of its own, with the level it is gained at. Once saved, the subclass prints on its class's card.
  • Species. The Speed box is words on the card. For a sheet to get the speed, add a Speed rule under What the sheet tracks.
  • Equipment. The form changes with the Category. If you change the category, the weapon or armour fields that no longer fit are cleared.
  • Magic item. Leave Stat line empty and the card writes one from the type, the rarity and the attunement. For a weapon, armour, a shield or ammunition, Based on names the plain item it is made from, such as a flail for a Flail +3. On a sheet the item then attacks or protects as that base does.

A magic item made to fit any weapon or armour, such as Weapon +1, can arrive in a source someone shares. Its card has Make a concrete item. Pick a base and you get a page of your own, such as Longsword +1.

What the sheet tracks

A description is words for the player to read. A character sheet does not act on them. For a page to change a sheet, you give it rules, under the heading What the sheet tracks. These kinds have that list:

  • a subclass, on each feature's page;
  • a class option;
  • a species, and a subrace or lineage;
  • a background and a feat;
  • a magic item.

A rule can be, for example:

  • a choice the player makes;
  • something the player turns on and off;
  • points or uses to spend, and when they come back;
  • a proficiency, a bonus, a speed or a sense;
  • a spell.

Tap + add what it does. A map opens that shows every rule, in seven groups. When the window is wide enough, it takes the place of the Page. Tap a rule and answer its menus. A greyed rule cannot be used in that place: tap it to read why. Back on the form, the rule reads as a plain sentence. Tap it to change it, or to remove it with the bin at the top.

A magic item's rules count only while the item is equipped, and attuned too if it requires attunement.

The chapter Your Character covers what these rules do on a sheet.

Descriptions and tables

The description of a spell, a magic item or a class feature is a list of blocks. A block is a passage of text or a table. A species' traits are a list of the same sort.

  • + add passage and + add table add a block at the end.
  • The small + between two blocks adds one there.
  • Drag a block by its handle to move it.

Every other Description is one box, with three buttons under it: Bold head, Bullet and Table. Text you paste from a PDF is joined back into paragraphs.

A table opens as the reader will see it, and you edit it in place:

  • Tap a row to edit it. Tap a header to rename or remove its column.
  • + Row and + Column add to it.
  • In the top bar, the copy icon adds a copy of the table below, and the bin removes the table.

When you add a table, the app asks what kind. Three of them save typing:

  • Roll table. You never type the die ranges. A d4 to a d12 has one row for each face. For a d20 or a d100, say how many results you want and the app divides the die between them. Open a result and use Covers to give it more or less of the die. The other results share what is left.
  • From a list. Type or dictate your results, with commas between them. The app picks the smallest die they divide into evenly: six results make a d6, and three make a d6 at two rolls each.
  • From pasted text. Paste a table copied from a PDF and set the number of columns. Each word becomes one cell, so a cell of two words comes apart. Correct it in the table afterwards.