Exploring
Play is the table. Outside a fight it shows the map the party is exploring, with pins on it. This chapter covers both hats, and each part says which.
Fights start in the chapter Setting Up a Fight. Preparing a map is in the chapter Maps.
The Play tab
The DM chooses the map. Every player's Play tab shows it.
- As a player, you see "Your DM hasn't revealed a map yet." until the DM places one.
- As the DM, the map's name sits at the top of the map, with Start Encounter under it.
Drag to move the map. Pinch to zoom, or use a mouse's scroll wheel.
The DM sees every pin on the map. A player sees only what has been revealed.
The tools
On a phone or tablet, the tools are a row of icons above the map, at the right.
On a Mac or Windows machine, the tools are tabs at the top of a column on the right of the map. The small arrow at the map's top right corner folds the column away. A narrow window folds it for you.
| Tool | Icon | Who has it |
|---|---|---|
| Note | sticky note | the DM and every player |
| Encounter | shield | the DM |
| Photo | camera | the DM |
| Clue | magnifier | the DM |
| Map link | arrow | the DM |
As a player, you have your tools only during a live session. Beside Note is the dice button. See the chapter Dice Are Photos.
Notes
Both hats can write a note on the map.
- Tap Note.
- Type. On a phone or tablet the box is at the bottom of the map. On a Mac or Windows machine it is in the side column.
- Tap the map where the note belongs.
Everyone sees the note at once. Nobody approves it first.
- As a player, you can write notes only during a live session.
- As the DM, you can write them at any time, to prepare a map.
- Tap a note to read it. Its card names who wrote it and when.
- You can drag, edit and delete your own notes. The DM can do the same to anyone's. The pencil on the card is edit.
- Deleting a note removes it for everyone.
Pins from your Atlas
As the DM, you pin encounters, photos and clues from a shelf.
- Tap Encounter, Photo or Clue. The shelf opens. On a phone or tablet it runs along the bottom of the screen. On a Mac or Windows machine it fills the side column.
- Tap a section to see what it holds.
- Press and hold an item, drag it onto the map, and let go.
Three things to know:
- Dropping a photo or a clue reveals it. The players get it as the pin lands.
- The Photo shelf has two sources. Your Photos is the campaign's own. Bestiary is the monster pictures from the rules.
- An encounter pin does not start a fight. It marks where a saved encounter is. The players get the pin and the picture of that encounter's map. View on the pin's card opens the picture.
Tap a photo or clue pin and its card opens. View shows the picture full screen, on your own device only. That is true for both hats. Only the DM can drag these pins or delete them.
When notes and encounter pins crowd together, they fold into one badge with a count. Tap it to zoom in.
Revealing
As the DM, everything you make starts hidden. A player's Atlas holds only what you have revealed. A hidden map, photo or clue is not greyed out there: it is absent.
In your own Atlas, a hidden map or asset is dimmed and marked UNREVEALED.
You reveal one thing at a time. There is no way to reveal a whole section, and no way to take a reveal back. Once a player's device has a picture, it keeps it.
These are the ways to reveal:
- A map. In the Atlas, under Maps, press and hold the map and choose Place on Play tab. On a Mac or Windows machine, right-click it. The map is revealed and becomes the table's map. During a session, the tower icon in the top bar of an open map does the same.
- A photo or a clue, as a pin. Drag it from the shelf onto the map. From the Atlas, press and hold it under Assets and choose Place on Explore Map: the Play tab opens with the shelf ready.
- A photo or a clue, full screen. See the next section.
- Two maps at once. Making a map link reveals the map at each end.
You can do all of this with no session running. The players get what you revealed when they next join.
Showing a picture to the whole table
As the DM, you can fill every player's Play tab with one picture.
- In the Atlas, under Assets, press and hold a photo or a clue and choose Display on Play tab. If it was hidden, this reveals it.
- In Rules, during a session, a card's picture has a Show to players button. It does the same with that picture.
While the picture is up, your own screen is marked PRESENTING. Tap the X at the top right to end it for everyone. A player cannot close it.
A player who joins while a picture is up does not get it. Show it again.
Map links
A map link is a passage between two maps, such as the stairs to the level below. As the DM, you make one in four taps:
- Tap Map link.
- Tap the map where the passage starts.
- Pick the other map from the list.
- Tap that map where the passage arrives.
That is one link with an arrow on each map. It reveals both maps, and no map beyond them.
- Tapping an arrow opens the other map on your own device. Nobody else moves. As the DM, use Place on Play tab to move the table.
- A player sees an arrow only when the map at its other end has been revealed to them. Until then the arrow is not drawn at all.
- To delete a link, press and hold its arrow, or right-click it on a Mac or Windows machine, and choose Delete Link. It goes from both maps.
As a player, during a session you can also tap any map in your Atlas to look at it on your own Play tab.
Door pins
A door pin joins two saved encounters, for a fight that moves from room to room. It lives on an encounter's map, not on the map the party explores, and only the DM can make one.
Press and hold an empty part of the encounter's map, or right-click it on a Mac or Windows machine. Choose Pin a door to another encounter… and pick the encounter. This works only while a saved encounter is running.
- A new door pin is hidden from the players. On your screen it is faint.
- Tap it for three controls: Go to the other encounter, Visible to players, and Remove door pin.
- Go to starts the other encounter. It is greyed out during a fight. End the fight first.
- A player sees a door pin once Visible to players is on. On a dark map, their character must also have seen that spot. For a player it is only a mark. Tapping it does nothing.
Walking an encounter's map
Once the DM starts an encounter, its map and tokens fill Play, before any fight. Exploration lets the players walk their own tokens around that map.
As the DM:
- The map needs a scale. See the chapter Maps.
- Tap Enable exploration, in the dark box at the top of the map. It starts Paused: nobody moves yet.
- Play lets the party move. Pause stops every journey at once, and the players cannot work doors. Play does not restart a journey that Pause stopped.
- The X in the box turns exploration off. With it off, each move a player makes waits for you to accept it.
As a player:
- Tap the running figure in the toolbar and choose Move or Dash. Then drag from your own token and let go where you want to be. Nobody has to approve it.
- Move reaches as far as your character's speed. Dash reaches twice as far. Nothing is used up: when one journey ends you can start the next.
- You make one journey at a time. Stop, in the pill at the top of the map, ends it early.
- The pill reads Exploring when you may move and Held by DM when you may not.
- The app refuses a route that is blocked.
On a map that uses sight, a monster that sees a character for the first time is a moment for the DM:
- A hostile monster holds the whole party. A friendly one does not.
- As the DM, you get a notice that names the monster and who it sees. It comes once for each monster in an encounter.
- The players are told nothing. They see Held by DM and no reason.
- A trigger you drew on the map holds the party the same way.
As the DM, you move monsters by dragging. With exploration on and not paused, and no tool chosen, drag a monster and let go. Several can travel at once. The stop button in the box ends one of them.
What a token can see is in the chapter Sight, Light and Effects.
Opening Combat Setup pauses the party. If exploration was on then, it comes back by itself after the fight, paused. See the chapter Running a Fight.
Your own copy
As a player, you keep what the DM revealed. The maps, photos, clues and pins stay on your device, and you can read them with no session and no network.
Tap Browse Offline on the start screen, then tap a campaign.
- You get Atlas, Rules and Play. If you joined with a character on this device, you get Sheet too.
- In the Atlas, tap a map to open it on Play. Tap a photo or a clue that is pinned to a map to go to its pin. One that is not pinned opens full screen.
- The copy is for reading. It has no tools, and you cannot add a note.
When it updates. The copy updates when you play. Joining a session brings in everything the DM has revealed, the nights you missed included. Between sessions it never asks the DM for anything.
Deleting it. Tap the three dots on the campaign's row and choose the row that begins Delete. It names the campaign.
- The copy leaves this device only. The DM's campaign is untouched, and joining a later session gives you the copy again.
- On a device with no pairing, it deletes at once. It does not ask.
- With a phone paired to a Mac or Windows machine, the other device keeps its copy and hands it back the next time the two connect. Delete it on both to be rid of it. The chapter On Mac and Windows covers pairing.
- If this device is also the DM of that campaign, the menu offers Clear received session data instead. It removes what you received as a player and keeps the work you made.