Your Character
This chapter is for players. Far Table keeps your character sheet. You give it your choices and your scores. It works out the numbers from the rules you picked.
The sheet never rolls. You roll your own dice, and the sheet shows what to add. At a table it also writes the roll under your dice photo.
A saved character is optional. The chapter Hosting and Joining covers joining without one.
Your characters
Tap Characters on the start screen. In a session, the character you joined with is on the Sheet tab.
- Tap a row to open the sheet.
- Tap + to make a character.
- The three dots on a row hold Share… and Delete. Delete asks first.
To see a finished sheet first, tap Try the demo party at the top of the list. It adds five ready-made characters, all on the 2014 rules. They are yours to change or delete. Delete one and the row comes back to offer a fresh copy.
Characters live in your library, beside your homebrew, and travel in the same backup. See the chapter Backup, Restore and Sharing.
A character belongs to you, not to a campaign. One character can play in several campaigns, and deleting a campaign never deletes it.
Making a character
Tap +. The form first asks for New character or Existing character. Choose Existing to copy in a character you already play, and type its current scores and totals. Either kind can be any level from 1 to 20. Only the name and the class are required.
Two answers shape everything else:
- Rules is 2014 or 2024. It sets which rules the sheet reads, and you cannot change it later. Changing it on the form clears the class, species and background you picked. The chapter Two Editions explains the difference.
- Sources are what the character picks from: the SRD for its rules, plus any homebrew source in your library. Every list on the form and on the sheet offers what those sources hold and nothing else. Tap the row to turn sources on or off. Turn on the other edition's SRD and its entries are offered with a year tag. Your rules stay as they were.
The rest of the form:
- Ability scores. Type all six as scores, not modifiers.
- Hit points. Type your maximum, or leave it blank and enter it later on Stats. A new character can turn on Calculate from gains instead, and give each level's gain.
- Starting equipment. A new character sees this once it has a class or a background. Pick one option from each group. Its items go on Gear and its gold into Coins. A group you leave alone adds nothing.
Tap Create and the sheet opens. You can correct the species, the background, the scores and the level later, on the sheet.
The sheet
The heading shows your portrait, your name, and one line with your class, level, subclass, species and sources.
- Tap the portrait or the name to open Story.
- Tap the sources to turn one on or off.
Under the heading are five tabs. Tap one, or swipe.
- Stats: scores, armour, hit points, senses and features.
- Checks: saving throws, ability checks and skills.
- Actions: what you can do on your turn, and your rests.
- Spells: your slots and your spells. A character who casts nothing has no Spells tab.
- Gear: what you carry, and your coins.
The sheet's top bar has three icons of its own. The book opens Rules, and Back returns you to the sheet. The share icon shares the character. A checklist icon with a number shows while a choice is waiting for you.
On the Sheet tab in a session the sheet has no top bar of its own. Rules is its own tab there.
An underlined name is a link. Tap a spell, an item, a feature or a trait, and its card or its rule opens. Tap a label such as Armour or a skill's name, and a short definition opens with a link into the rules.
Reading a roll
Every row you can roll shows what to add, at its right end: +6 for an attack or a check, DC 17 for a save you force. Roll your die and add the number.
- Away from a table, tapping a roll's number does nothing. In a session it picks the roll for a dice photo. See "At the table".
- Some numbers are yours to record, such as hit points and ability scores. Tapping one of those opens a box to change it.
- An effect you have switched on is already in the number. An extra die stays a die: with Bless on, roll the d4 yourself.
- There is no control for advantage. Roll two dice yourself.
At the table
Join a session with a character and the sheet works with the dice camera. On the join form, tap your character under SAVED CHARACTERS. To play someone else in that campaign, restart the app and tap a different one.
To roll from the Sheet tab:
- Tap the number on the row you want. A strip opens at the foot of the sheet. It names the roll and shows what makes up the number.
- Tap the button on the strip, such as To Hit, Damage or Roll Perception. The camera opens.
- Photograph your dice. The photo goes to the table with the roll written under it, such as "Fire Bolt · To Hit +9".
More to know:
- The line is fixed when you tap the button, even if the turn changes while the camera is open.
- While your DM sets up a fight, an attack row offers Initiative instead.
- On someone else's turn, an attack row offers Reaction. Tap it to get To Hit and Damage. Checks and saves are always there.
- Effects that could add to the roll are small buttons under the strip. Tap one to turn it on or off.
The chapter Dice Are Photos covers the camera and the photo.
Actions
Actions has four parts: your resources, Effects, your turn, and Rest.
Your turn is four headings: Action, Bonus action, Reaction and When it happens. Each one holds the attacks, spells and features that take that part of a turn. When it happens is for things that cost a use and take no action.
The headings start folded, with a count. Tap one to open it. The sheet remembers which ones you left open. A heading with nothing under it is not shown.
Resources are the things you can use a set number of times, such as Action Surge or a wand's charges.
- Each has a row of dots, one filled dot for each use left, and a word for when the uses come back.
- Tap the dots to spend a use or to give one back.
- A row under your turn that costs a use has a Spend button. It takes the use from the same dots.
Effects are switches.
- A feature that changes a number is already in the number. Its switch starts on. Turn it off when it does not apply, such as Defense when you take your armour off.
- A feature you turn on for a while, such as Rage, is a switch with dots under it. Turning it on takes one use. Turning it off does not give the use back.
- A spell such as Bless has a Turn on button on its own row. After that it is a switch under Effects too.
- Nothing is timed. Turn a switch off yourself when the effect ends.
Rest has two buttons. A line under them says what each one gives back for this character.
- Short rest gives back what your class restores on a short rest. Then, if you are hurt, it offers Spend Hit Dice: roll a real die and type what it shows.
- Long rest gives back your hit points, every spell slot and what your class restores on a long rest. It clears temporary hit points and death saves. Under the 2024 rules every Hit Die comes back. Under the 2014 rules half of them do.
- A rest leaves your switches as they are.
- Charges that come back "at dawn" never refill by themselves. Tap the dots back.
What your features put on the sheet
Class features, subclass features, species traits, feats and homebrew all follow one pattern:
- It changes a number. The number already has it, and a switch under Effects lets you take it out. Archery adds 2 to your ranged attacks.
- You do it at the table. It is a row under the turn it takes. Retaliation is a row under Reaction. The sheet reminds you. It does not run the rule.
- It has uses. It has dots, with a Spend button or a switch.
- It asks you to choose. It waits on the Choices page.
- It gives you spells. They are on the Spells tab, already prepared.
A feature you have not reached yet has no row. The whole list, level by level, is under Features on Stats.
Wild Shape is the exception. A druid who has it gets a sixth tab, Wild Shape.
- Add a beast puts a form on your list. It offers the beasts your level allows, and a switch shows the rest.
- Tap a form to see yourself in that body. From there, Use this form spends one use and makes the form active. Your other tabs still show your own character.
- End form gives nothing back. If you used a form by mistake, Correct activation can return the use.
Choices
The sheet leaves every choice to you: your subclass, an ability increase or a feat, a Fighting Style, Expertise and the like. They wait on the Choices page. Open it in either of two ways:
- On Stats, tap Choices at the right of the Features heading. An amber dot beside it means a choice is still open.
- Tap the checklist icon in the sheet's top bar.
On the page:
- A choice counts for you, such as "2 of 3 taken". When a new level gives you more, it opens again.
- An option you do not qualify for yet stays hidden.
- Under Ability increases and feats, each level offers an Ability increase or a Feat, one or the other. Clear frees the level to choose again.
- A feat's prerequisite is shown as a reminder. It never stops the pick.
- On an Existing character, an increase for a level it already had adds nothing. It is in the scores you typed.
Spells
The slot box sits at the top of the Spells tab, with a row of dots for each spell level. Tap a dot to spend a slot. Tap a spent one to get it back. The sheet never spends a slot for you.
The first line of the box counts your spells against your limit, such as "Prepared 14 of 15". It turns red when you go over.
To pick spells, tap +.
- The list is your class's spell list, up to the highest level your class can cast.
- Mark the spells you want. Unmark one to take it off your sheet.
- Done saves your marks. Cancel drops them all.
- The last row, Write a homebrew spell, opens the editor on a new spell. When you come back, the spell is on your character.
A wizard has two lists, Prepared and Book. From Book, + shows the whole wizard list. From Prepared, + shows the Book.
More to know:
- A spell your class, subclass, species or feat gives you is locked in, and does not count against your limit.
- A spell you can cast is also a row on Actions, under the turn its casting time takes.
- A warlock's slots are marked Pact. A short rest gives them back.
- With more than one source of spells, buttons after Spells from: change between them: one for each class that casts, and one for a species or a feat that gives spells. Each source casts with its own ability and its own numbers.
Gear
The Gear tab lists what you carry, with its weight after Carried. The sheet sets no carrying limit.
Tap + to pick from Equipment or Magic items, then Done. For something the rules do not have, tap Create new gear. It opens the editor on a new item, and the item is in your gear when you come back.
Each item has two controls:
- The circle with a tick says whether the item is equipped. An equipped weapon has an attack row on Actions. Equipped armour and an equipped shield set your armour class.
- The small button beside it opens the item's own sheet: how many you have, a note, and Remove.
Magic items add two things:
- An item that needs attunement has a second mark, Attuned. Its rules count only while it is both equipped and attuned. The top of the list counts your attuned items against the three the rules allow. It never stops a fourth.
- An item's charges show on Actions, among your resources, while the item is in use.
Coins adds up your coins in gold pieces. Treasure is for valuables, such as a gem, each with what it is worth. Treasure is never added to your coins. When you sell something, remove the line and add the coins you got.
Stats
You record these. Tap the number and type.
- Your six ability scores.
- Current, maximum and temporary hit points. The sheet never applies damage: you do. A maximum you have not entered shows as a dash.
- The Hit Dice you have left. Spend beside them opens the same box as a short rest.
- Death saves. Tap a dot to fill the row up to it. Tap the last filled dot to empty it.
The sheet works out the rest: armour, initiative, speed, proficiency bonus, passive Perception, your senses, your resistances and, for a caster, spell save DC and spell attack.
- Tap the number in the Armour box to see what feeds it: the base, your armour, your shield and any bonus. You cannot type an armour class.
- Proficiencies and languages lists your languages, tools, weapons and armour. Tap Edit at the right of its heading to change the lists.
Skills and saves
On Checks, each skill and each saving throw has a mark at its left: ○ for none, ● for proficient, ◆ for expertise. Tap a skill's mark to change it.
- How many skills you may mark comes from your class, background, species and feats. The heading keeps count, such as "Skills 4 of 6", and a tap never goes over it.
- ◆ needs an Expertise choice with room.
- A mark the rules gave you stays put. Tap it and the sheet names where it came from.
- Saving throws come from your class and your features. You cannot add one by hand.
Finding things on the sheet
Tap the magnifier at the right of the sheet's heading and type: a skill, a spell, a piece of gear, a choice. Pick a result and the sheet goes to that row, on whichever tab holds it.
Story and your portrait
Tap your portrait or your name to open Story.
- Choose portrait sets your picture. On a phone or tablet it comes from the camera or your photo library. On a Mac or Windows machine it comes from a file.
- Gallery holds more pictures of your character. Any of them can become the portrait.
- Name renames the character. The species and the background's source can be changed here too.
- The rest is yours to write. There is no Save button. What you type is saved as you leave a field.
Levelling up
Your level is on Story, with two buttons under it.
Level up adds one level. For hit points, choose one:
- Die result: roll your real Hit Die and type the number.
- Fixed gain: the class's fixed amount. The dialog opens on this.
- Enter HP later: the level applies now, and a reminder waits on Story.
Then tap Apply level.
- Your current hit points stay where they are.
- Features the level gives you appear by themselves. Choices it opens wait on the Choices page.
Correct levels fixes a level that was entered wrong. Your hit points and the choices you made stay as they are, so correct your maximum yourself if it is wrong too.
A second class
In Level up, open the class menu at the top and pick Another class. The new class starts at level 1. After that, Level up asks which class gains the level.
- The sheet does not check the ability scores the rules ask for.
- Your proficiency bonus follows your total level. Features, resources, feats, Hit Dice and the subclass follow each class's own level.
- Each class that casts keeps its own spell list. The slots are shared, as the rules' multiclass table sets them. Pact slots stay apart. A homebrew casting class is not combined, and neither is a fighter or rogue who casts through a subclass. A note on the sheet says so.
Your subclass
When your class reaches its subclass level, the Subclass row on the Choices page reads Choose a subclass. Tap Choose and pick one. Its features join your sheet at the levels the rules give them. Change on the same row picks again.
Homebrew on the sheet
Homebrew in your library is offered beside the rules' own entries, once its source is on for the character: classes, subclasses, species, backgrounds, feats, spells and items. What you pick counts on the sheet like the rules' own. The chapter Homebrew covers writing it.
At a DM's table your own homebrew goes to your DM with the sheet. A pick's row says where it stands, such as Waiting on the DM or Not at this table. A page your DM turned down still works on your sheet.
A homebrew entry that asks you to choose shows its picks on the Choices page: under its own row, or under Homebrew picks.
The sheet keeps its own copy of every homebrew page you pick, so a pick never goes blank:
- The page is edited. The sheet follows the page.
- You turn its source off for this character. The pick stays and keeps working. Its row says the source is off.
- The page is deleted, or its source is removed. The pick keeps working from the copy. Its row reads No longer in any source.
Gear whose page is gone reads Not in this library. Its own sheet offers Relink, to point it at another page. A spell whose page is gone sits under Elsewhere on the Spells tab.
Sharing your sheet with your DM
When you join with a saved character, a copy of your sheet goes to your DM, and again each time you change it.
- Only your DM gets it. The other players never do.
- Your DM can read every tab. Your DM cannot change it or roll from it.
- The one button your DM has is Accept, for a homebrew page of yours that the table does not have yet. See the chapter Homebrew.
- Your portrait goes with the sheet. Your gallery stays with you.
As the DM, tap the player's row on the Session tab, or Sheet on their token's panel in a fight. A phone paired with your computer has them under Players' sheets.
Sharing a character
This makes a file, not the copy your DM gets. Tap the share icon in the sheet's top bar, or Share… under the three dots in the Characters list. On the Sheet tab in a session, tap the three dots at the top right, then Share and your character's name. Far Table makes one file that holds the character and the homebrew it uses. The chapter Backup, Restore and Sharing covers where the file can go and how someone adds it.
On a Mac or Windows machine
Three things differ:
- Two columns. The page stays at a reading width in the middle of the window. When the window is wide enough, the tabs use two columns. Stats puts your saving throws and skills on the right. Actions puts your turn on the left, and your resources, Effects and Rest on the right. Gear puts Coins and Treasure on the right.
- Mouse and keyboard. Click a tab to change it. Enter saves a box where you typed a number. Point at a row of dots to read what they are for.
- Dice need your phone. With a phone paired, a roll button on the computer's sheet opens the camera on the phone. Or roll from the phone: tap Character sheet on its Mirror screen and pick a roll there. With no phone paired, the computer says "Pair your phone to take the dice photo." The chapter On Mac and Windows covers pairing.
If the text size in your device's settings is large, about 130% or more, the sheet draws a simpler layout in one column. Some of this chapter looks different there.
Sheet layouts
Far Table can draw the sheet in four layouts: Classic, Claude, Codex and Paper Zoom. Until you pick another, the sheet uses Claude, and Claude is the layout this chapter describes. The others arrange the same sheet differently. Every number, tap and roll works the same.
The four names are under Sheet layout in a three-dot menu:
- on the Characters screen;
- in the top bar of an open sheet;
- at the top right of a session, while the Sheet tab is up.
Your pick holds for every character on that device.